Here is the hgh injected process.

Here is the hgh injected process.

Step 1:
Remove cap/break top off of the bacteriostatic water vial and extract 3.0 cc into the mixing syringe at moderate pace

Step 2:
Make sure that the amount of 3.0 cc has been extracted out of the vial containing the bacteriostatic water.

Step 3:
Remove the colored plastic cap from the small Somatropin HGH bottle (Vial, Ampoule) as it will no- longer be needed.

Step 4:
Place the mixing syringe into the glass Somatropin HGH bottle and insert slowly (a little bit faster than a drop-per-drop pace will do) and insert the bacteriostatic water into vial.

Step 5:
After 3.0 cc of bacteriostatic water has been inserted slowlyturn the bottle until the liquid has mixed with the powder. DO NOT SHAKE IT: SHAKING WILL RUIN PROTEIN MIXTURE.

Step 6:
Mixing is complete when the liquid has become clear and there are no signs of powder left in the Somatropin HGH bottle or vial. Make sure he bottle or mixture is not cloudy.

Step 7:
When ready for your first dosage, get an administering syringe ready.

Step 8:
Remove the plastic caps from the administering syringes and use small insulin syringe.

Step 9:
Insert the administering syringe into the bacteriostatic water bottle (now the mixed growth hormone)

Step 10:
Extract the liquid at a moderate pace until 40.0 units is read on the syringe.

Step 11:
Make sure the syringe reads 40.0 units. (this amount is 2 IU of HGH)

Step 12:
Inject Somatropin into the belly area or inner thigh. The injection is subcutaneous.

Step 13:
Dispose of the mixing and administering syringes in a secure safe disposable container

Step 14:
Take the bacteriostatic water (now mixed with growth hormone) and place in the refrigerator

Step 15:
Make sure to place it in the refrigerator and NOT THE FREEZER - DO NOT FREEZE hGH ever.

Step 16:
Place all hGH vials in a safe location in the cooler or refridgerator where it will not fall on the floor and break

Final Step 17:
Ensure refrigerator is at a normal temperature. Keeping the bottle in refrigerator will allow reconstituted hGH solution to last for 14 days.

It is highly recommended you take the administrated dosages, right before you go to sleep at night, this will enhance the overall efficacy.

Landmarkchem

Email landmarkroids@gmail.com

Five best steroid for bodybuilders

Five best steroid for bodybuilders

All the bodybuilders you see on the Mr. Olympia stage are on steroids— believe that. It’s gotten them to where they are. These are the five best steroids for bodybuilders.

Testosterone Suspension

Test is the best drug that bodybuilder can get. When it comes to strength gains, suspension is the best form of testosterone due to its fast acting because of the lack of ester in it. Taking it is like taking testosterone in water. The only drawback to testosterone suspension is, due to its short half-life, it has to be taken daily.

Trenbolone Acetate

Tren is a very potent steroid and is three times more effective than testosterone. It’s a goldmine for athletes to increase their strength and power output within the first week. Another benefit of taking trenbolone is that it doesn’t cause water retention. This means you will pack on lean, dense muscle and your strength gains will be bang on, too. Some athletes prefer taking trenbolone every day, its short ester means it can be taken every-other-day. You also need to make sure you balance the ratio of your dosage of testosterone meanwhile taking tren.

Nandrolone

Nandrolone is well known for being one of the best off-season bulking agents for steroid users. It is also a favorite among athletes for its healing and recovery benefits. Strength should also increase to a degree, although this steroid isn’t well known for being a strong strength promoter. For the off-season athlete he will also enjoy the recovery and therapeutic benefits that are provided. This is important as off-season training is normally the time when the heaviest weights are used. The user will also find that he should be able to gain more size with less body fat than he would without Nandrolone use due to the positive impact the steroid will have on the metabolism.

Masteron

The effects of Masteron will be displayed in the most efficient way during a cutting cycle.This is why the hormone will most commonly be found at the end of bodybuilding contest prep cycles. The added Masteron will help him lose that last bit of fat that often hangs on for dear life at the end of a cycle. It will also ensure his physique appears as hard as can be. Of course, the anti-estrogenic effect will simply enhance this overall look. For those that are not competitive bodybuilder lean, it is possible that the effects of Masteron may not be all that noticeable.

Dianabol

Dianabol was one of the first steroids ever developed and used by bodybuilders such as Arnold Schwarzenegger. Its popularity rests on the fact that it is very easily administered and provides solid, long-lasting results. When Dbol is present in the bloodstream, there is a notable increase in insulin. When Dbol is administered during periods of extreme stress, Ribonucleic acid (RNA) is synthesized, which brings about lower levels of stress, increased appetite, a relaxed feeling and sounder sleep.

Landmarkchem

Email landmarkroids@gmail.com

Anavar (Oxandrolone) Use as a Cutting Agent

Anavar (Oxandrolone) Use as a Cutting AgentWant to lose weight and keep it off for good? Do you repeatedly lose weight only to gain it back? If yes, there’s a better way to lose weight by which you can avoid weight loss diet pitfalls and achieve weight loss success in the long run. It’s time you place your trust in Anavar (also known as Oxandrolone, AnVar, and Oxandrin), one of the safest oral steroids available.What Is Anavar?Anavar, the synthetic anabolic steroid derivative of Dihydrotestosterone, was first introduced in 1964 in the United States market by Searle Laboratories, which is now known as Pfizer Inc. The chemical name of Oxandrolone is 17β-hydroxy-17α-methyl-2-oxa-5α-androstan-3-one.This steroid has the anabolic/androgenic ratio of 322-630:24 and has the molecular weight of 306.4442 g/ml at the base. This drug has an active life of 8-12 hours and can be detected over a period of 3-4 weeks. The active ingredient in Anavar tablets is the anabolic steroid Oxandrolone and the list of inactive ingredients include cornstarch, lactose, magnesium stearate, and hydroxypropyl methylcellulose. This steroid can easily be purchased online, with or without a medical prescription, in different forms such as pills, capsules, injections, and creams.Medical Benefits Of Anavar Anavar is medically prescribed for the treatment of individuals diagnosed with involuntary weight loss caused by chronic or acute injury, infection, or illness. This drug is one of the very few steroids that can even be used by sick patients as it is metabolized by the kidney and not the liver, like most anabolic compounds. It is also beneficial for treating loss of body muscle, the elderly with weight loss problems, cancer patients on chemotherapy, and HIV positive patients. This is primarily because Anavar has the unique potential of restoring and maintaining body weight, especially lean body mass, and can dramatically reduce hospital stay besides improving wound healing compared to standard nutritional therapy alone.Anavar is used by those into bodybuilding and athletics to reduce abdominal and visceral fat. Use of this steroid is not associated with hair loss, which is a common complication associated with other anabolic steroids and performance enhancing drugs. A good choice for in-season use, Anavar also has the ability to improve respiratory function and heal cutaneous wounds. Considered to be one of the best cutting cycle drugs, this steroid has the unique potential of reducing body fat and weight and keeping them under control.One of the biggest advantages of Anavar is its ability to promote muscle mass and strength gains without water retention. Secondly, this anabolic steroid does not aromatize at any dose and it does not suppress the natural production of testosterone in the body. Anavar is also admired by those into sports with weight categories like Mixed Martial Arts, Power lifting, and Boxing as this drug leads to lowest sulfobromophthalein retention when compared to Norethandrolone, Fluoxymesterone, methAndriol, and Methyltestosterone. In addition to these advantages, Anavar has the potential of improving nitric oxide levels in the body that promotes muscle cell volumization and fluid displacement between muscle cells and also have a positive influence on protein synthesis.Anavar For Men And Women Anavar can be used by both men and women as it does not result in virilization and aromatization. This drug does not promote the development of secondary male sexual characteristics in women.Recommended Dose Of Anavar Male athletes may use Anavar in dosages of 20-100mg every day in a cycle of 6-10 weeks. Female athletes, on the other hand, use Anavar in dosages of 5-15mg every day.Anavar is generally stacked with Halotestin, Proviron, Equipoise, Primobolan, Winstrol, and Human growth hormone.

buy genuine steroid powders from
zara.zhou@landmarkchem.com
skype Qualitygear_LMC
Wickrme pharmaroids
LANDMARKCHEM

The 5 most popular steroid stacks and cycles

Email zara.zhou@landmarkchem.com

​Skype Qualitygear_LMC

​Wickrme pharmaroids

​LANDMARKCHEM

1. The Beginner Cycle (Test/Deca)

Testoterone-Enanthate: 500mg Week 1-12
Deca Durabolan: 200mg Week 1-12

This is my recommended stack for any first time user. The Deca/Test combo is a tried and true stack that will give excellent gains with minimal side effects. In addition the slow release compounds require less injections, which is always a good place to start for beginners. Its incredibly popular particularly as a base stack which can be modified for future cycles.

Potential Side Effects And PCT (Post-Cycle treatment)

Gynecomastia, water retention, high blood pressure and high cholesterol are all potential side effects of this cycle. 10mg of nolvadex everyday may be used to combat any symptoms you have whilst on cycle.

Your PCT consist of 2 weeks off cycle to allow the hormones to clear your system. You should then take nolvadex for 3 weeks to help re-establish normal testoerone production. 40mg everyday for 2 weeks and 20mg of Nolvadex for the third week.

2. The Kickstart Beginner Cycle (Test/Deca/Dbol)

Testoterone-Enanthate: 500mg Week 1-12
Deca Durabolan: 200mg Week 1-12
Dianabol: 25mg per day Week 1-6

It’s the same as the beginners cycle above with Dianabol added to the stack. Dianabol is a fast working steroid that can be taken in oral form, which will make great gains in muscle and strength at the beginning of the cycle (often referred to as front loading).

Potential Side Effects And PCT

Gynecomastia, water retention, high blood pressure and high cholesterol are all potential side effects of this cycle. 10mg of nolvadex everyday may be used to combat any symptoms you have whilst on cycle. Also any oral will be have a toxic effect on the liver so a liver supplement or booster should be taken with the dianabol and its use should be no longer than 6 weeks.

Your PCT consist of 2 weeks off cycle to allow the hormones to clear your system. You should then take nolvadex for 3 weeks to help re-establish normal testosterone production. 40mg everyday for 2 weeks and 20mg of Nolvadex for the third week.

3. Classic Cut (Test/Tren/Winstrol)

Testoterone-Propionate 100mg EOD 1-12
Trenbolone-Acetate 75mg EOD 1-12
Winstrol 50/daily 7-12

This is the most popular cutting cycle going around. The reason is rather simple, it works and it works well. Your diet will dictate the amount of success you will have with this stack, a poor diet will still get results but a great diet will have you looking like a god. Importantly this stack will also help maintain strength whilst on a calorie-deficient (fat-loss) diet.

Potential Side Effects And PCT

Tren is a powerful hormone so if you feel adverse effects you can drop your dosage down to 50mg. You should take 0.5mg or arimidex every other day with this stack to protect yourself against oestrogen build-up.

Your PCT should begin immediately after your cycle. Take 500iu daily of HCG for 10 days. One week after your cycle you should begin taking Clomid in addition to the HCG. Take 150mg/day for the fist 2 weeks, 100mg/day for week 3 and drop down to 50mg/day for week 4.

4. Winnie the Pooh (Test/Winstrol)

Testoterone-Enanthate: 500mg Week 1-12
Winstrol: 50mg per day Week 7-12

Another popular variation of the test cycle is to add Winstrol to the back end of the cycle. Winstrol is popular steroid for those looking for athletic performance and a cut physique, used often by bodybuilders for contest prep and dieting athletes to maintain strength. Stacking it with test means that your body avoids sub-normal hormonal levels due to the short half-life of the Winny.

Potential Side Effects And PCT

If your taking Winstrol orally then take some liver cleansers to help protect your liver. I would also recommend some fish oil to help protect against collagen loss in the joints both of which should be taken during the cycle.

Your PCT consist of 2 weeks off cycle to allow the hormones to clear your system. You should then take nolvadex for 3 weeks to help re-establish normal testosterone production. 40mg everyday for 2 weeks and 20mg of Nolvadex for the third week.

5. Lonely Cycles

The last but by no means least popular cycle is the standalone cycles. Due to cost, and the ability to monitor and test for side effects single steroid only cycles are increasingly popular. Some of the most popular are:

Test

A test only cycle is very popular because it is about as safe as it gets when it comes to steroids. Most people report good gains with a test only cycle and its easy to administer as well. 500/mg week is a good starting point for 8-12 weeks although the number can change based on your goals and experience. Have some arimidex on hand in case of any aromatisation effects then after your cycle take 2 weeks off to clear your system and begin a PCT with nolvadex. 40mg everyday for 2 weeks and 20mg of Nolvadex for the third week

Sustanon

Another popular cycle with excellent bulking properties it used to be all the rage 10 years ago. Although not as popular these days the effects of the cycle are still impressive, taking 500/mg week for 8-12 weeks should give you noticeable size increase. As sustanon is a combination of four testosterone compounds the side effects and PCT are the same as a test only cycle.

Tren

Tren only cycles are used by those who want to avoid the aromatisation side effects of other steroids and are looking to cut. With the ability to burn fat, maintain strength and avoid aromatisation it should be the most popular cycle of all right? Unfortunately there is a downside, tren only cycles are often plagued by poor sleep, low libido and increased aggression (amongst other issues) but 300mg/week for 6-8 weeks will give you some amazing results if you monitor your symptoms closely. Because it is so potent a good PCT should include 1000iu of HCG for 10 days, 20/mg Nolva every day for 5 weeks and 50/mg of Clomid for 3 weeks.

You may have noticed that these stacks are all very simple. That’s because for 95% of users out there simple will be more than enough to see some great results. If you decide to follow any of these cycles make sure you take as much notice of the PCT programs that go with it. Laziness and ignorance are no excuse for wrecking your body.

Email zara.zhou@landmarkchem.com

​Skype Qualitygear_LMC

​Wickrme pharmaroids

​LANDMARKCHEM

How to Prevent Steroids Injestion Pain?

How to Prevent Steroids Injestion Pain?

What causes (non injection related) injection pain?
1. The short ester has higher melting point easily causing crystals
2. High concentration(mg/ml)
3. High Benzyl Alcohol Content
4. Injecting too quickly
5. Allergic and Injecting not deep enough
6. Virgin muscle
7. Fascia displacement
8. Histamine reaction

Precipitation of short estered compounds
Pain is caused when the oil/solvent are absorbed by the body and crystals are left behind. Long ester = high solubility, short ester = less solubility.
Short esters(propionate or acetate)are harder, more painful crystals with melting pointsin the 100c range. A hormone with a longer esters(excluding cypionate – cyp is long but also high melting point) can have a melting point in the 20c-40c range. not far off from human body temp.

High concentration(mg/ml)
Building off of point1: Let’s say it takes the body 24hours to absorb 1 ml of a certain oil/solvent blend, and 24hours to absorb 50mg of testosterone propionate. If 50mg(or less) of testosterone propionate is in 1ml of that oil, this injection should be painless. On the other hand, if 100mg of testosterone propionate is inthat same 1 ml of solution, then after 24 hours the body will have absorbed 50mg and 1ml, leaving 50mg belind in the injection area, crystalized and painful.
Its better to shoot 3ml of 50ma/ml Testosterone Propionate than 1ml of 150mg/ml Testosterone Propionate.
This is also why water based suspensions(Testosterone base/no ester,Winstrol) hurt the most, water is very easily absored in the body.

High Benzyl Alcohol Content
Within 24hours will most likely be a burning pain witch is usually caused by a high concentration of BA(Benzyl Alcohol)
The solvents used can cause pain in 2 ways. Benzyl alcohol(BA) is used at 1%-2% as a preservative and antiseptic. If the alcohol content is too high the gear will burn. Pain in the first 24hours is usually caused by heavy solvents, pain in the next few hours is usually caused by crystalization.
Another way is bad recipe. If someone used 2%BA,and the rest of the solution oil, the mg/ml would have to be low due to oil’s weak ability to hold crystals. On the other hand, a recipe like 2% BA,5% Guaiacol(super solvent), 10% Benzyl Salicylate (liquid asprin) with the filler split 50:50 between Ethyl Oleate (oil/solvent hybrid) and normal oil should be far less painful.

Fascia displacement because of Injecting too quickly
If you inject too quickly it can tear tissue. This occurs when a large volumetric quantity is injected intoa single site. The oil pushes the muscle fascia apart and results in stretching and eventually scarring with the muscle. This can be avoided by reducing single site injection volume and spreading the injections between multiple sites. This is also a good idea as more smaller, more frequent dosing significantly reduces many of the side effects of AAS. These become exacerbated by peak and troughs in hormone levels. The reduction in side effects is particularly dramatic with trenbolone acetate when an ED injection schedule is maintained.

Virgin muscle
If your muscle is new to the hormone, It will absorb the hormone very slowly, but absorb the oil/solvent very quickly. This will cause more crytailzation and pain. As your muscles recognize the hormones, they will be absorbed more quickly, thus less pain. The deeper you inject into the center of a muscle group,the better.

Allergic and Injecting not deep enough
Allergic and when you may not get the injection deep enough in the muscle to where.

Histamine reaction
This doesn’t occur as often, but is still a potential possibility. For a compound to become biologically active the ester must be cleaved from the parent molecule. This results in the formation of a carboxylic acid. Some people find that they are sensitive to one of these. This results in swelling,warmth,redness and possibly a rash at the injection site. In the worst instance the individual may have an existing allergy to the carrier oil(sessame, etc..) that can result in anaphylaxis(swelling and occlusion of the airway) in addition to localised inflammation. If any histamine reaction results, immediately discontinue use and switch to an alternate carrier oil and/or alternate ester. If anaphylaxis results,immediately seek medical attention.

How to prevent pain before I inject?
1. Dilute compound with sterile cutting oil to get mg/ml at <=200 for long esters and <=100 for short esters.
2. Don’t bother with b-12, its water based-absorbed so quickly it will have little to no impact.
3. Gently warm the oil to improve viscosity. You could put the vial in the bathroom sink and let hot water run over the vial for 2 minutes, and shake well. This will lower the oils viscosity also making it easier it pull into the syringe.
4. Inject very slowly to reduce muscle fascia displacement, take 30 seconds per ml. Use a 25g pin to inject so it forces you to move slowly.
5. Add 20% Benzyl Benzoate by volume to propionate and phenylpropionate esetrs.
6. Use 23g needle to prevent high output pressure from smaller needles.
7. Inject frequently w/less volume, <3ml for large muscles and <2ml for smaller muscles.
8. Ensure that the injection is deep intra-muscular and fully through any sub cutaneous fat
9. You can also add: 100mg Benadryl one hour prior to injection; 800mg ibuprofen one hour prior to injection.

skype Qualitygear_LMC
wickr: pharmaroids
Email: zara.zhou@landmarkchem.com
website:https://pharmaroids.wordpress.com/

How to use peptide ?

How to use peptide ?

Firstly, take an alcohol swab to the stopper of both your peptide vial and the vial of the diluent.


Secondly,draw your preferred diluent with a 1cc syringe. Choose an amount that will make measuring the final product simple.


1ml(cc) per 10mg vial of Melanotan would mean each 10 mark on a U100 slin syringe would equal 1mg of Melanotan


1ml(cc) per 10 IU vial of HGH would mean each 10 mark on a U100 slin syringe would equal 1 IU of HGH


2ml(cc) per 10mg vial of Melanotan would mean each 10 mark on a U100 slin syringe would equal 1mg of Melanotan


2ml(cc) added to a 10 IU vial of HGH would mean that the 20 mark on a U100 syringe would equal 1 IU of HGH


Then, take the syringe with the dilutent and push it into the vial of lyophilized powder letting the dilutent dissolve the peptide.


Finally, after all of the dilutent has been added to the vial, gentling swirl (do NOT agitate or violently shake the vial) until the lyophilized powder has dissolved and you are left with a clear liquid. The peptide is now ready for use. Store your now reconstituted peptide in the refrigerator


skype Qualitygear_LMC

wickr: pharmaroids

Email: zara.zhou@landmarkchem.com

website:https://pharmaroids.wordpress.com/

How to homebrew Testosterone enanthate step by step?

How to homebrew Testosterone enanthate step by step?



Powder: 5 grams Dosage: 20 ml @ 250 mg/ml

Requirements:
1.5 grams powder
2.15.25 ml sesame oil
3.Benzyl Alcohol 1ml 5% BA
4.Syringes 3cc & 5/10cc
5.18 or 20 gauge needles
6.Vial
7.Sterile Vial
8.Waterman sterile filter


Procedure:
1.measure 5 grams of powder
2.place the powder in the vial
3.add BA to the vial
4.heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilize it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
5.add the oil to the vial but save 2 ml of oil in the syringe for later
6.gently shake the vial.
7.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
8.place an 18 or 20 gauge needle in the sterile vial and attach the Waterman sterile filter
9.place another needle in the sterile vial to relieve the pressure
10.draw out the solution with a syringe and run it though the Waterman filter
11.take the other syringe with 2 ml of oil (saved previously) and run it through the Waterman filter into the solution

For any question you may have,get back to me freely.I'm always here for you.

You can also reach out to me by following chat tools.
Wickrme Pharmaroids
skype Qualitygear_LMC
zara.zhou@landmarkchem.com

worldleading supplier of steroid powders/How to Produce Tablets

How to Produce Tablets

1. Prepare all the necessary materials:
   Steroid Powders, Microcrystalline Cellulose, Magnesium Stearate, ect.
2. Put them into mixer machine to assure they’re mixed up well.
   Pls watch the following vedio and see how mixer machine work.
3. Put mixer into pill press machine.Set your press to make a pill you like. Size and shape. Weigh the tablet. Then all of your conversions will be based off the tab weight. 
   Pls watch the following video if you want to know how to use TDP-1.5 machine. 
4. Everything is available here to help you produce tablets of your brand.
   99%+ Purity Steroid Powders
   Filling Materials Such As Microcrystalline Cellulose, Magnesium Stearate
   Mixer Machine 

For more details,please feel free to inbox me

zara.zhou@landmarkchem.com
skype Qualitygear_LMC